Craft

Qualitätsprüfungen bei Schmuck

7 min read
QC Inspection Lead
Qualitätsprüfungen bei Schmuck

A high return rate due to tarnishing or broken clasps can devastate a young jewelry brand. At FY jewelry, we maintain an independent quality control department that enforces strict AQL 1.5 standard audits on every production batch before packaging.

1. Incoming Raw Material Assay (XRF Testing)

Every ingot of brass, silver granules, or 316L stainless steel undergoes X-ray fluorescence spectrometry to verify alloy composition. We certify that lead and cadmium levels remain below 10ppm, fully compliant with EU REACH Annex XVII.

2. In-Process Casting & Soldering Inspection

Under 20x stereomicroscopes, inspectors check for:

  • Surface porosity and pinholes.
  • Seamless laser welding joints.
  • Alignment and spring tension of lobster clasps and tie clip hinges.
  • 3. Accelerated Salt Spray & Tarnish Testing

    Random samples from each electroplating lot undergo 48 to 96 hours of continuous neutral salt spray (ASTM B117) exposure. This simulates 1–2 years of sweat and humidity exposure, ensuring zero blistering, peeling, or premature oxidation.

    4. Clasp Cycle & Pull Force Endurance

    Jump rings and chain connections are tested on motorized tensile gauges to verify minimum 5kg breaking strength, while spring clasps undergo 5,000 continuous opening-closing cycles to prevent field failure.

    Verwandte Artikel

    Lost-Wax Casting vs. CNC Stamping in Mass Production
    Craft

    Lost-Wax Casting vs. CNC Stamping in Mass Production

    Sep 28, 2026