Jewelry Design

From 2D Sketches to Production-Ready 3D CAD

5 min read
CAD Engineering Department
From 2D Sketches to Production-Ready 3D CAD

Translating a flat 2-dimensional illustration into a 3D volumetric model requires rigorous calculation of physical metal behavior during thermal solidification.

1. Accounting for Investment Shrinkage

During the molten lost-wax process, metal contracts as it cools. Experienced CAD artists apply precise scale expansion multipliers (typically +1.5% to +2.5% for silver and brass) to ensure finished ring finger sizes and stone bezels match specifications exactly.

2. Under-Cuts and Draft Angles

For pieces created via reusable silicone molds, draft angles of at least 3 degrees must be modeled on interior surfaces so delicate wax patterns can be extracted without tearing.

3. Structural Feasibility Feedback

Within 48 hours of receiving your sketches, FY jewelry provides interactive 360-degree digital turnarounds with cross-sectional thickness measurements and estimated metal weights.

Related Articles

Designing a Jewelry Collection
Jewelry Design

Designing a Jewelry Collection

Oct 8, 2026