Craft

Lost-Wax Casting vs. CNC Stamping in Mass Production

6 min read
Master Mold Engineer
Lost-Wax Casting vs. CNC Stamping in Mass Production

Selecting the optimal manufacturing method determines your unit costs, tooling lead times, and structural durability. Here is how we evaluate customer designs at FY jewelry:

1. Lost-Wax Investment Casting

  • Best Suited For: Organic sculpted rings, hollowed bangles, 3D figurative motifs, and settings requiring micropavé stone seats.
  • Tooling Investment: Low initial rubber mold cost ($50–$120 per design).
  • Lead Time: Fast prototype turnaround (3–5 days for silicone master molds).
  • Limitations: Higher polishing labor required to eliminate micro-casting skin.
  • 2. CNC Hydraulic Stamping

  • Best Suited For: High-volume geometric charms, flat coin medallions, tie clips, and money clips with crisp sharp angles.
  • Tooling Investment: Higher hardened steel die tooling ($300–$800).
  • Unit Economics: Exceptionally rapid cycle time (< 2 seconds per press) and mirror-flat surface requiring minimal hand polishing.
  • Limitations: Restricted to 2.5D relief profiles with uniform thickness.
  • Related Articles

    Jewelry Quality Checks
    Craft

    Jewelry Quality Checks

    Oct 20, 2026